What to Check if Your Hot Water Service is Not Functioning

What to Check if Your Hot Water Service is Not Functioning

Blog Article

Call Today

Here down the page you will find some excellent information regarding Hot Water Heater Repair.

Lots of modern residences utilize an electric hot water heater for their heating unit, due to its comfort and simplicity of use. Nonetheless, just like any other electric appliances, issues might arise with its use, all of a sudden. It can be really discouraging to awaken to a cold shower as opposed to a warm one or having your bathroom with water that isn't hot adequate or even also hot. Whatever the situation might be, water heater troubles can be quite stressful. Fortunately, we've made a checklist of possible options to your water heater problems. There are a variety of factors that might create a lot of these issues, maybe an issue with the power supply, the electric burner, or the thermostat. Prior to doing anything, ensure you shut off the primary power supply for safety and security. Whatever the problem is, getting it repaired must not present way too much of a concern if you follow these steps:

Call A Professional:

If after replacing all malfunctioning components and also resetting your temperature, the water heater still isn't working, you may need to get in touch with a professional plumber for a specialist point of view. The trouble with your heater could be that the hot and cold taps have been switched over or it might be undersized for the quantity of hot water needed in your house. Whatever the instance may be, a professional plumber would aid fix the issue.

Check Your Power Supply:

As standard as this may seem, it is really essential. Without ample power, your water heater will not function. So the first thing to do when your water suddenly retires is to validate that it isn't a power issue. Inspect if the fuse is blown out or the circuit breaker stumbled. If the breaker is the issue, merely transform it off and on once more. Change any busted or damaged fuse. Evaluate the device with power after these adjustments to see if it's now functioning.

Inspect Your Thermostat:

If your water heater still isn't functioning or the water coming out isn't hot sufficient, you might need to check the temperature level settings on your top thermostat. Make sure the circuit breaker is turned off before doing anything. Open up the access panel and also press the red switch for temperature level reset above the thermostat. This should aid warm the water. Transform the circuit breaker back on and examine if the trouble has been dealt with.

Check the Burner in the Hot Water Heater:

If it's not a power issue, then attempt taking a look at your heating element if it is still working. Examine each of your burner to make sure the problem isn't with any one of them. If any one of them is faulty, change that component and after that inspect whether the hot water is back on.

Verdict

Hot water heater issues are not constantly significant. A lot of them result from small issues like a blown fuse or damaged burner. Changing the defective components should work. Nonetheless, if you are still unable to fix the problem, give a call to your closest plumber ahead to get it fixed.

Common Reasons Why Your Hot Water Heater Isn’t Working

Water Gets Too Hot

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

Water Doesn’t Get Hot

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

Leaking Water Heater

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

Noisy Water Heater

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

Pilot Light Keeps Going Out

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

Water Smells Bad

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

Water Looks Brown Or Rusted

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

We were introduced to that article about No Hot Water — Water Heater Repair through an acquaintance on a different web page. For those who appreciated our article kindly be sure to share it. Many thanks for your time. Don't hesitate to check up our blog back soon.

Browse Our Site

Report this page